The mounting rail and suitable cable lug for M6
Screwdrivers with 3.5 mm and 4.5 mm bladeĬable with 10 mm 2 cross-section for grounding Tion location) with suitable screwdriver/wrench M6 screws and nuts (length depends on installa.
In addition, you will need the following components:.58 8.1 Diagnostics / correction of errors. 50Ħ.1 Downloading the project to the CPU 312C. 41 4.5 Downloading and checking the module configuration to the CPU 312C. 35 4.4 Establishing the online connection between the PC and CPU 312C. 34Ĥ.3 Reproducing the module configuration in STEP 7 Lite. 25Ĥ Configuring the control in STEP 7 Lite. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.ġ Welcome.
Since variance cannot be precluded entirely, we cannot guarantee full consistency.
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as careful operation and maintenance.Īll names identified by ® are registered trademarks of the Siemens AG. This device may only be used for the applications described in the catalog or the technical description and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. Within the context of the safety notes in this documentation qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards. Commissioning and operation of a device/system may only be performed by qualified personnel. The device/system may only be set up and used in conjunction with this documentation. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. Indicates that an unintended result or situation can occur if the corresponding information is not taken into account. Without a safety alert symbol, indicates that property damage can result if proper precautions are not taken. With a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
Indicates that death or severe personal injury may result if proper precautions are not taken. Indicates that death or severe personal injury will result if proper precautions are not taken. These notices shown below are graded according to the degree of danger.
The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. SIMATIC Distributed I-O System DP-ASi Link EWA 4NEB 710 6055-02b.Simantic Net NCM for Industrial Ethernet S7.Siemens Telephone OPTISET E ADVANCE PLUS.